If you are done with the installation at this point, it is recommended that you familiarize yourself with the instructions in the Oracle GlassFish Server Quick Start Guide. This section lists the configuration parameters in the screens displayed for the options in Step 7 in To Perform a Custom Installation. The following are the parameters displayed in the Configuration screen when you choose the Create a server domain option in Step 7 in To Perform a Custom Installation.
The default port is The port on which the non-secure HTTP server will listen. Note that the port used for the secure HTTP listener is You can leave this parameter empty to enable unauthenticated logins to the Admin Console, but make sure that the Username field has " admin " as the input value. Specifying a password is highly recommended if you are installing GlassFish Server in a production environment.
Specify whether an operating system service will be created for the DAS. The service will be started when the operating system is booted.
If a service is not created here, the DAS can be started manually using the asadmin start-domain subcommand. Also note that on Unix or Linux systems, you must run the installer as superuser or root if you want to create a system service for the domain. Specify the name for the DAS operating system service. The default name is domain1Service. This parameter is only required if the Create Operating System service parameter is enabled. Start the domain as soon as it is created.
This option is enabled by default. Note that is necessary for the DAS to be running before you can configure any server instances or clusters. If you choose to not start the domain at this time, you can start it manually later using the asadmin start-domain subcommand.
Ensure that this option is enabled if you plan on performing more configurations during this installation procedure. The DAS must be running in order to create any server instances or clusters.
The following are the parameters displayed in the Configuration screen when you choose the Create a standalone server instance option in step 7 in To Perform a Custom Installation. This option enables you to create a standalone GlassFish Server instance. The DAS for the domain in which the standalone server instance will be created must be running with the specified name and at the specified port before configuring a standalone server instance.
See the Parameters for the Create a server domain Option for instructions. The unique name to use for the standalone GlassFish Server instance. If the name is already in use, an error will be generated when the configuration is performed. The default name is instance1. The name of the physical host on which the DAS is running. The default name is localhost. The following are the parameters displayed in the Configuration screen when you choose the Create a clustered server instance option in Step 7 in To Perform a Custom Installation.
This option enables you to create a new cluster or a clustered server instance in a new or existing a cluster. The DAS for the domain in which the standalone server instance will be created must be running with the specified name and at the specified port before configuring a cluster or clustered server instance. The unique name to use for the clustered GlassFish Server instance. Specify whether a new cluster will be created at this time. The default is to leave this option disabled.
If left disabled, the cluster specified in the Cluster Name field, below, must already exist. Ensure that this option is enabled if the cluster in which you want to create the clustered server instance does not yet exist. Ensure that this option is disabled if the cluster in which you want to create the clustered server existence already exists.
The unique name to use for the cluster. The default name is c1. Silent mode is a non-interactive installation based on user-defined parameters captured in an answer file. The answer file can be used later to install GlassFish Server on one or more systems. It is not possible to perform a silent installation using the more complex Custom Installation path described in To Perform a Custom Installation. The answer file forms the template for silent installation.
The file is created when you use the dry-run -n option to start an interactive installation. In dry-run mode, actual installation does not take place.
During the interactive installation you can accept the default values presented or you can change them. Your input is collected and stored in the answer file, which is then used to install GlassFish Server. You can use the answer file as it is or you can modify the file before using it. The installation wizard is used to create the answer file. Actual installation does not take place. When launching the self-extracting installer from the command-line, it possible to specify several command line options that may be useful to you.
If you do not include a path to the answer file, the file is created under the directory from which the installation program is run. It is not possible to use the Custom Installation path when generating an answer file for silent-mode installation. A progress bar is displayed as the answer file is created and an empty as-install-parent directory is created.
The configuration results panel presents the recently executed command in the center section and this is a selectable text. The answer file generated using the procedure described in Creating the Installation Answer File provides a number of system-specific parameters as well as parameters that you selected during dry-run mode installation.
Values for some parameters can be edited as described in To Edit the Answer File. The following example shows the contents of an answer file that was created during a dry-run mode installation. All default values were accepted during the installation. The following example contains a complete answer file, where most of the parameters are not used in GlassFish Server 3. For an answer file template that contains only the elements required to perform a typical installation, see the Example Provide the password confirmation for Administration Console.
Make sure that this matches the value for Domain. Parameters not listed are system specific. Do not change system-specific parameters. Doing so will cause problems with the installation program. The non-interactive installation program reads the specified answer file, checks for adequate disk space, and installs GlassFish Server based on the data in the answer file.
Verify that the parameters in the answer file are set to the values that you want to use for silent installation, as described in Reviewing the Installation Answer File. Answer files generated using the GlassFish Server 3. Navigate to the directory that contains the self-extracting installer file and the installation answer file. The name of the answer file that was generated according to the instructions in Creating the Installation Answer File.
Ensure that you provide the complete path to the answer file. When the prompt is returned, the silent installation is complete and the installation components are installed on your system. The following options can be used when you run the installation program from the command line using the self-extracting installation file. Specify the desired options after typing the installation file name at the command prompt.
Run the installation program in silent mode using the answer file specified. Use this option with the -s option. Runs the installation program in verbose mode, which can be useful for troubleshooting.
Run the installation program in trial mode to generate the answer file for silent mode installation. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a The modified work must itself be a software library. You may place library facilities that are a work based on the Library side-by- side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities.
Installation Files for GlassFish Server 3. Choosing an Installation Method There are two general sets of questions you should consider when deciding which GlassFish Server 3. Full Platform or Web Profile Distribution?
Note: Regardless of whether you choose the Full Platform or Web Profile distribution, you can add or removed packages after installation by using the Update Tool or pkg utility. Table lists the available ZIP file downloads.
Table lists the available self-extracting bundles. Download the desired GlassFish Server 3. Change to the directory where you downloaded the ZIP file. Unzip the file. Solaris, Linux, and Mac OS X systems: unzip zip-file-name zip-file-name is the name of the file that you downloaded. For example: unzip ogs To Install GlassFish Server Using the Self-Extracting File Before You Begin When launching the self-extracting installer from the command-line, it possible to specify several command-line options that may be useful to you.
Change to the directory where you downloaded the self-extracting file. Start the installer. At the command prompt, type: sh. Windows systems: Double-click the executable. For example, double-click: ogs Note: Additional setup options are available.
Note: Update Tool differs from Upgrade Tool, which is used to migrate the configuration and deployed applications from an earlier version of GlassFish Server to the current version. Note: If you choose to cancel the installation at this point, no GlassFish Server files will be installed, but the directory you specified for as-install-parent will remain.
Note: To secure your domain, you should provide a password for the admin user. Tip: The configuration results panel presents the recently executed commands in the center section and this is selectable text. Choose the kind of Custom Installation you want to perform. Install and Configure Install the GlassFish Server binaries, and then configure a DAS and one or more standalone server instances, clusters, or clustered instances.
Specify where to install GlassFish Server. Specify the path to the JDK to be used with the installation. JDK 6 is required. See Installation Requirements for more information.
Tip: The configuration results panel presents the recently executed command in the center section. Custom Configuration Parameters This section lists the configuration parameters in the screens displayed for the options in Step 7 in To Perform a Custom Installation.
Parameters for the Create a server domain Option Parameters for the Create a standalone server instance Option Parameters for the Create a clustered server instance Option Parameters for the Create a server domain Option The following are the parameters displayed in the Configuration screen when you choose the Create a server domain option in Step 7 in To Perform a Custom Installation.
The initial domain is created during installation and it contains a group of instances that are administered together. Because each domain has its own administration server DAS that hosts administrative applications, you can customize connection settings with ease. When you configured all the options, you can continue to manage ongoing configuration for the life of your GlassFish server installation.
You can adjust resources to improve productivity and solve all the issues that might arise when you modify the default settings. Before working with GlassFish, you need to understand the basics of tiered applications and learn how to deploy and run them on a Java EE server. Please include the details provided in the info link when reporting any issues. The latest stable releases of Eclipse GlassFish 5. This version is compatible with Jakarta EE 8 Specification.
The downloads below are for legacy use only. Most users will want to use the stable releases listed above. This is the first release candidate for GlassFish 6. This is a pre-release to allow users, vendors, and all community members a glimpse into the changes forthcoming with Jakarta EE 9. This is not a stable release and is intended to allow users to begin evaluation of the proposed name-space and pruning changes included in this new EE 9 specification release.
0コメント